N-470 PCIe 5G 4-Speed Multi-Gigabit Network Card

2017/04/17  

1 x RJ45 5G/2.5G /1G/100M port
16K Jumbo Frames
Standard CAT-6A cabling with RJ45 Connector

  • Ordering Code: N-470
  • Part No: NE-T21-1110-00-00012
  • Solution: TN4005

This card is a 5GBase-T network adapter that’s runs on a high speed PCIe x4 host but interface.

This card hosts the Tehuti’s new 3rd generation TN4010 controller, and optimized 10 Gigabit Ethernet MAC designed for low-power, low-cost, single-port connectivity required by Application Servers and Workstations. The TN4010 MAC is paired with Marvell® Alaska® 88E2010P transceiver, a low-power, high-performance 5 Gigabit Ethernet PHY, to enable four-speed connectivity (5GBase-T, 2.5GBase-T, 1000Base-T, and 100Base-TX) over low-cost  standard CAT-6a Ethernet cabling, up to 100m (Cat-5e and CAT-6 are supported compliant to Link Segment specifications). 

This combination creates a new gateway to cost-conscious consumer applications, as well as to intensive data environments.

 

Features

Four-Speed 5G/2.5G /1G/100M Base-T

Backward compatibility with 1000Base-T, 100Base-T Networks

PCI Express Gen-2 x4 Host Bus interface

EEE (Energy Efficient Ethernet)

16K Jumbo Frames

IP, TCP, UDP checksum offloading

IEEE 802.1Q Tagged VLAN

Virtual NIC support

Reduced CPU utilization and improved throughput

Standard CAT-6A cabling with RJ45 Connector

 

Requirements

Hardware

The following system specs are recommended minimum for Windows & Linux

PCIe slot: Available 4-Lanes PCI-Express slot gen 2.0 or later

Processor: Quad Core 3.0GHz or higher

RAM: 4GB memory or higher

Software

Operating systems supported are (both 32 and 64 bits)

Windows 7

Windows Server 2008 R2

Windows Server 2012

Windows 8.1

Windows Server 2012 R2

Windows 10Linux 2.6.24 or later

VMware ESXi 5.x/6.0

Mac OS X 10.12.6 or later

 

Package Contents

1 x PCIe 5G 4-Speed Multi-Gigabit Network Card

1 x Driver CD

1 x User Manual

+(852)-2556 1788

INFO@SUNRICHTECH.COM.HK